De winkelwagen is leeg
singxer-sda2-000
SALE
Singxer
singxer-sda2-000singxer-sda2-001singxer-sda2-003

Singxer - DAC SDA2 - AK4497 Accusilicon Balanced NOS DAC & Headphone Amplifier

Normale prijs: € 619 Onze prijs: € 579
€ 479 excl. BTW
Power cable (Default None)
In voorraad
In Winkelwagen
  • Beschrijving
  • Specificaties

Singxer - DAC SDA 2 - AK4497 Accusilicon Balanced NOS DAC & Headphone Amplifier

SDA-2 Accusilicon AS318B Version!

The SDA-2 is aN high-performance D/A Converter with preamplifier and headphone amplifier. Fully balanced design. Based on XMOS's latest xCORE-200 series chipset for USB Audio input and the AKM497, AKM's third-generation DAC chip for DA conversion and the AK4118 digital audio s/pdif input receiver chip,. The STM32 main control CPU, Xilinx's large-scale FPGA processing the clock system circuit and digital audio stream. The amplifier is desgin is a 4-way full balanced circuit. Independent discrete class A amp. 

PCM supports up to 384Khz, DSD uses native direct solution technology, supports up to DSD512, and all interfaces support DSD decoding.
AKM's flagship DAC chip, the AK4497EQ supports DSD native direct solution mode. The DSD digital stream does not pass through the internal digital filter and modulator, and works in NOS mode. PCM can also work in NOS mode, which is in line with e.g. HQPlayer design concept.

SDA-2 is the first DAC / preamp / heapdhone product we developed using following technologies approach:

  1. USB uses our first generation isolation technology: SCIT technology (Singxer capacitor isolation technique), SCIT technology is a full isolation technology (ground isolation), high-speed signal using 150Mbps isolation chip, low-speed signal using optocoupler isolation It can completely isolate the interference from the PC; the USB version of the high version can basically reach the level of the SU-1 independent digital interface.
  2. Source synchronization technology and FPGA shaping technology, re-shaping the isolated I2S signal; thus eliminating the additive jitter caused by the isolation chip
  3. The self-developed clock system uses a femtosecond crystal oscillator as the local reference clock
  4. Class A discrete amp circuit, full balanced amplification using 8 transistors per buffer.

TECHNICAL SPECIFICATIONS

Sample rate: PCM: 44.1KHz,48KHz,88.2KHz,96KHz, 176.4KHz,192KHz,352.8KHz,384KHz

DSD Support 

Native & DoP 2.8 MHz (DSD64), 6 MHz (DSD128), 11.2 MHz (DSD256)

Native 22.5792 MHz (DSD512)

Bit depth: I2S output max 32 bit, S/PDIF max 24 bit

 


Inteface specifications

 

1, USB input socket is a standard USB-B type female socket, USB power supply range is 4.5V-5.1V;
2, SPDIF interface input standard S / PDIF signal, input impedance is 75 ohms, AES input impedance is 110 ohms;
3, the power input is 115V/ 230V AC, and the internal 30W O-type transformer is used for power supply;
4, I2S input is LVDS level in the form of HDMI interface, compatible with SU-1 interface;

Analog output

Output level (0dBFS):
      PCM: RCA single-ended output is 2V RMS, XLR balanced output is 4V RMS
      DSD: RCA single-ended output is 1.8V RMS, XLR balanced output is 3.6V RMS
Output impedance: 22 ohms (RCA single ended) / 44 ohms (XLR balanced)
Frequency response: 20-20kHz +/-0.2dB
Signal to noise ratio: 125dB
Distortion characteristics:
      THD+N (1kHz, 0dBFS) 0.00025% at fs=44.1Khz (PCM)
      THD+N (1kHz, 0dBFS) 0.00030% at DSD256
Dynamic response (1kHz, -60dBFS) 125dB
Left and right channel separation >125dB

Balanced output noise floor: 2.2uv RMS


Amp balance maximum output power 3480mW@30Ω, 0dBFS

Headhpone output

30Ω 3480mW
75Ω 1640mW
150Ω 920mW
300Ω 440mW
600Ω 220mW

Distortion of the amp balanced output, 0dBFS, fs=44.1Khz (PCM)
75Ω load THD+N -105dB
600Ω load THD+N -110dB


Compatibility

1, Windows 7, Windows 8, Windows 10; 32/64 bit, need to install a dedicated driver
2, Native MacOS 10.6 and later, using the system comes with a driver
3, Native Linux with UAC2 compliant kernel, using the system's own driver, (tested on Ubuntu and Daphile systems, based on INTEL X86 platform)
4, Android OS 4.2 and above, the device needs to support OTG function, in general, the Android 5.0 system is supported by default, and the following 5.0 recommendations are used with a dedicated player.

Merk URL : http://www.singxer.com/pd.jsp?id=18
Gewicht: 3 kg
Breedte: 220 mm
Lengte: 266 mm
Hoogte: 46 mm
Merk: SingxerSingxer

Specificaties

AKM AK4118 / STM32
118dB
RCA Single Ended is 2V RMS, XLR balanced output is 4V RMS / 22 ohms (RCA single ended) / 45 ohms (XLR balanced)
20-20kHz +/-0.1dB
2.0
Windows 8; Windows 10; iOS 10; Android
> 120dB
2.8
266MM * 220MM * 46MM, excluding machine feet and the rear connectors
USB Cable

Others looked at:

Afbeelding Product Prijs
Hifiman - Sundara Planar Magnetic Headphones € 349
€ 288 excl. BTW
Bestel Nu! (5-12 dagen) Alvast bestellen
Resultaten 1 - 1 van 1
audiophilles mh service

MUSIC LOVERS

EXCELLENT SERVICE

mh contact mh payable

PERSONAL ADVICE

AFFORDABLE

keyboard_arrow_up