De winkelwagen is leeg
audio-gd_d28_dac_es9038_discrete_headphone_amplifier_001Audio-GD - NFB28.28 - Discrete Balanced ES9028 PRO DAC - PCM / DxD / DSD - Pre- & Headphone Amplifiernfb282015h1Audio-GD - NFB28.28 - Discrete Balanced ES9028 PRO DAC - PCM / DxD / DSD - Pre- & Headphone Amplifiern28201510Audio-GD - NFB28.28 - Discrete Balanced ES9028 PRO DAC - PCM / DxD / DSD - Pre- & Headphone AmplifierAudio-GD - NFB28.28 - Discrete Balanced ES9028 PRO DAC - PCM / DxD / DSD - Pre- & Headphone Amplifier

Audio-GD - NFB28.28 - Discrete Balanced ES9028 PRO DAC - PCM / DxD / DSD - Pre- & Headphone Amplifier

Normale prijs: € 1.089 Onze prijs: € 919
€ 760 excl. BTW
Audio-GD - Accusilicon AS318B 100Mhz Femto Clock Upgrade
Audio-GD - Remote Control (IR) Aluminium
Headphone Outputs
Analogue Outputs
HDMI I2S Input (Replace RJ45)
Power cable (Default C13 EURO)
Audio-GD - ACSS Analogue balanced interlink (mini-xlr)
Audio-GD - Digital SPDIF coax interlink RCA (1m)
Audio-GD - Digital SPDIF coax interlink BNC (1m)
Audio-GD - Analogue RCA interlink stereo pair (1m)
Product wordt niet meer verkocht
  • Beschrijving
  • Specificaties


Audio-GD - NFB 28 (Balanced Pre & Headphone Amp ES9028PRO  Amanero USB DAC)

Balanced Headphone & pre- amplifier equipted with hyper-modern Sabre ES9028Pro dac chip. All parts and components are selected based on excellent sonic and measurements performance. Components are e.g. from DALE resistors (USA), WIMA capacitors (Germany)  and NOVER parts (UK) . The used components but also the technical design (e.g. discrete analogue section) of this system were being selected after many years of experience and practices and are considered to perform and provide sublim sonic results. Supporting todays high resolutions and up to date interfaces like USB and I2S.

Latest update: Volume boards are equipped with Vishay KOA resistors (dual parallel)  to achieve very low tolerance  (0.05%)

This version includes the low jitter TCXO clocks & Amanero USB options

Optional Femto Accusilicon AS318B oscillators clock

N28psu dc servo

DC-Servo no-compromise OPA opamp with transistor upgrade included

audiogd koa volumeboards 001

Volume Boards are equipped with Vishay or KOA resistors, very low tolerance 0.05% .

  • Discrete  balanced DAC & headphone- &  preamplifier
  • DSD & DXD support from USB and I2S
  • Sabre ES9028PRO 32bit / 768K
  • Asynchronous 32bit / 384K  transfer  USB-32 Chip
  • Shortest current driven signal path with discrete and DC coupled ACSS output stages
  • R-core transformer
  • DALE resistors (USA), WIMA caps (Germany)  and NOVER components (UK)
  • 6-group PSU's to purify the power supply
  • Four-channel digital controlled relay-based volume control to avoid channel imbalance and will improve sound quality
  • 80 steps volume control in both high gain mode and low gain mode. smooth volume level control
  • Static storage control software to avoid degrade sound quality, the MCU will be disabled when inactive 

  • 1. USB input. 
  • 2. I2S Asynch. input (RJ45)
  • 3. Toslink optical SPDIF
  • 4. RCA coaxial SPDIF
  • 5. RCA
  • 6. XLR (balanced)


Outputs can be set to variable or fixed

  • ACSS balanced 
  • XLR balanced
  • RCA single ended
  • Headphone (4-pin) XLR balanced
  • Headphone 6,3mm jack single ended


Volume control consist of relay-controlled attenuators. Fully-independent, fully-balanced stereo volume controls. The volume controls feature consist of high-precision 0.05% tolerance film resistors and golden contact relays. Buffered inputs and outputs.There 4 channels volume boards are built in the unit to achieve ultimate balanced volume control. They are controlled by a digital signal controlling the high quality relays switching the precision resistors in analog area.

Audio-GD lineair volume characteristic Volume steps in comparison to standard volume control
volumecontrol1 volumecontrol2

Quality of volume control is very important in balanced applications . It have to effectuate the four channels to work as synchronous as possible to keep the balanced signal in perfect shape. In traditional volume controls the balanced output will introduce distortion which will negatively influence sound quality and performance and might even get worse than a single ended setup and waste the advantages of balanced designed solution.



The final step the of the signal flow are the analog output stages, they can have a massive effect the total sound quality. The output stages are directly placed behind the ES9028 pro dac chip and they are built with discrete transistors through-hole components becuase this offers the best results we discovered after many years of experience.
The high speed ACSS (propitiatory Audio-GD current driven signal processing system) are non feedback designed; the ES9028 pro output is in current mode amplified by the ACSS amp. No shortcuts are taken; a complete current driven solution. 
The output buffers are the pure class A to drive difficult headphone without any problem. The class A output stages will make sure you will get the most pure and real sound reproduction.


Download USB Amanero drivers for Windows 10
Download USB Amanero drivers for Windows 7 & 8

No drivers required for Linux and/or Mac OS
OSX 10.6+ and Linux with UAC2 compliant kernel
Microsoft Windows: KS/Wasapi/WDM/ASIO

Merk URL :
Gewicht: 4.9 kg
Breedte: 240 mm
Lengte: 360 mm
Hoogte: 80 mm


Sabre ES9028Pro
0.5 Vp-p
19 dBm
0.7V to 5V RMS (RCA) 0.7V to 10V RMS (XLR)
USB: 44.1 - 384kHz | Coax: 44.1 - 192kHz | Optical: 44.1 - 96kHz
1.0, 1.1, 2.0 & 3.0
Windows, iOS, Linux
10V RMS Balanced | 5.0V Single Ended
19V RMS (balanced , max)
9500mW / 25 ohm 8000MW / 40 ohm 3500MW / 100 ohm 1200MW / 300 ohm 600MW / 600 ohm
Remote Control
USB Cable
IEC Power Cord
audiophilles mh service



mh contact mh payable