HIGHLIGHTS
- Accusilicon Édition 90/98M
- Convertisseur USB numérique haut de gamme (basé sur Amanero)
- Prise en charge de Windows, Apple et Linux
- Taux d’échantillonnage PCM / taux DSD affiché à l’écran
- Entrée d’horloge principale externe 10 MHz
- Isolateur haute vitesse de 150 Mbps pour séparer l’entrée USB
- FPGA traite les données et l’horloge, et prend en charge la mise à niveau SQ
- Alimentations linéaires À cœur R et alimentations ultra PSU à 13 groupes
- Prend en charge jusqu’à PCM384K / DSD512 et DoP 256 sur S / PDIF.
- Conception de sortie ACSS S/PDIF de 2e génération (compatible avec les entrées S/PDIF standard)
DIGITAL INPUTS
ENTRÉE S/PDIF
Entrée audio coaxiale RCA 75 Ohm (0.5VPP @ 75 Ohm) .
ENTRÉE 10MHz
Entrée d’horloge externe 10 MHz (0.3VPP -3VPP @ 50 Ohm)
ENTRÉE USB
Entrée audio USB? USB2.0/USB3.0)
PORT DE MISE À JOUR Port 10 broches
Pour connecter l’Altera Blaster et procéder à une mise à jour du micrologiciel FPGA à partir de Windows, à l’aide du logiciel de programmation Altera. Ces mises à jour sont destinées à mettre à niveau la fonctionnalité et/ou la qualité sonore.
SORTIES NUMÉRIQUES
SORTIE AES/UER
Connecteur de sortie AES/EBU 5VPP @ 110 Ohm)
S/PDIF OUT STD
Connecteur de sortie coaxial standard, avec transformateur d’isolation de fil d’argent intégré. (0,5 VPP à 75 Ohm
SORTIE S/PDIF ACSS
Sortie utilisant la technologie de transmission de courant sur coaxial 0.5VPP @ 75 Ohm
Cette sortie applique la technologie ACSS coaxiale de 2e génération, qui offre une dégradation du signal encore plus réduite et une meilleure qualité sonore sur un câble coaxial.
SORTIE IIS
Signal IIS sur sortie HDMI (LVDS 3,3 V @ 110 Ohm). Il ne peut fonctionner qu’avec des DAC utilisant exactement la même définition de broche. Il ne peut PAS fonctionner avec les appareils audio / vidéo grand public dotés d’entrées HDMI, et la connexion du DI à de tels appareils pourrait l’endommager, auquel cas la garantie ne couvrira pas les réparations.
SORTIE CLK
Sorties 256fs horloge principale ou LRCK/WCLK (3.3V LVDS @ 50 Ohm) . Sélectionnable par l’utilisateur .
ÉNERGIE PROPRE
Un transformateur R-cores à faible bruit et à faible flux est utilisé pour alimenter toutes les pièces numériques. L’alimentation CC est répartie sur plusieurs régulateurs de puissance distincts. Les étages analogiques sont des shunts purs de classe A à faible bruit; alimenté par 3 groupes d’alimentations linéaires. Il en résulte une vitesse ultra-élevée et une puissance propre pour toutes les pièces individuelles.
SPECIFICATIONS
Les spécifications peuvent être sujettes à changement sans préavis pour l’amélioration du produit. | |
Horloge externe 10M | 50? 0.3Vpp- 3Vpp |
Entrée S/Pdif | 0,5 Vp-p à 75 Ohms |
Entrée USB | USB2.0 – USB3.0 |
Sortie HDMI-IIS | 3.3V LDVS à 100 ohms |
Sortie S/Pdif | 0,5 Vp-p à 75 Ohms |
Sortie AES/EBU | 5Vp-p à 110 ohms |
Sortie d’horloge |
Horloge 256fs |
Système d’exploitation de support (USB) |
Windows, OSX, Linux, ISO |
Échantillonnage de soutien | USB : 44.1kHz – 384kHz /32Bit DSD64-512 Entrée coaxiale : 44.1kHz – 192kHz / Dop Sortie coaxiale : 44.1kHz – 192kHz |
Puissance requise | Version 1: 100-120V AC 50/60 Hz Version 2: 220-240V AC 50/60 Hz? |
Power Consumption | 8W |
Package Weight | Environ 3. 5KG |
Dimensions | W240 X L240 X H85 (MM, avec pieds, Entièrement en aluminium ) |
Accessories | Pas d’accessoires |
USB SUPPORT
Télécharger les pilotes USB Amanero pour Windows 10
Télécharger les pilotes USB Amanero pour Windows 7 & 8
No drivers required for Linux and/or Mac OS
OSX 10.6+ and Linux with UAC2 compliant kernel
Microsoft Windows: KS/Wasapi/WDM/ASIO
Norman (client confirmé) –
Hello, i owned the DI20 for a year now and this piece of gear has been a tremendous change on my system which is not a HiFi system at the origin. I am making mastering for music production so the chain i own is very special, my monitors are ME GEITHAIN RL 901 K (https://sonicpurity.com.au/blog/2017/9/27/me-geithain-active-speakers) and my DAC is a MADA , AD-DA (from Fred FORSELL TECHNOLOGIES) one due its job in the studio. I just have a volume controler from him too and that ‘s it to listen music. I am on TIDAL .
The DI20 has opened the sound in many ways, the treebles are crystal clear and the bass goes deeper, but the most significant is that it’s now tri-dimentionnal instead of being stereo !!! the sound is out of the speakers ! so this is really a beautiful DI to add to any system that need a new one or for somebody who is searching to get one ! Thn’x to Magnat Hifi !
Bedy (client confirmé) –
I’ve had a DI-20 for a while and now I can pronounce it completely because it has stood the test of time. First I hesitated whether to go for the almost double version at the DI-20HE price. Maybe in the future I will go for the « HE » version. For now, this DI-20 is proving to be a substantial improvement in the sound quality of the Audio-gd R8 DAC (model 2021). When he had just arrived it only took me a few minutes to realize that it was a (big) step forward. I didn’t have much to compare, with the DI-20 the sound is much better in every way. The difference is so great that there is no need for too intense comparisons. From the first minute I realized and so it has remained in the audio system until today. I connect the DI-20 (which receives a signal from the PC via USB type A-B) with the R8 via HDMI (I2S). I’m not interested in other options. I listen to both PCM and DSD files. One more thing, although the sound improvement due to the DI-20 is really very big, the quality of the interconnect cables (USB, HDMI, signal) still matters as much, but also the quality of the USB output from the PC. Another advantage for the cheaper model DI-20, is cold, it does not heat up at all. The quality / price ratio is excellent for this model! 5 stars!
Marcel tiben (client confirmé) –
Echt de kers op de taart! Tijdje terug een r2r 11 dac gekocht bij magna hifi en nu uitgebreid met de DI-20. De di-20 staat nu een aantal dagen in m’n audio set. Absoluut een verbetering, geluid is er overall sterk op vooruit gegaan. ‘t klinkt nu zoals het hoort! En dank u wel Magna Hifi voor het advies en de erg vlotte service.
Jos Schellevis –
Really the icing on the cake! Bought a r2r 11 dac a while back at magna hifi and now expanded with the DI-20. The di-20 has been in my audio set for a few days now. Definitely an improvement, sound has improved overall. it now sounds as it should! And thank you Magna Hifi for the advice and the very smooth service.
Czech Buyer (client confirmé) –
The DI-20 is a very good interface for use with Audio-gd DACs. It runs cool to the touch, it is silent. It offers high rate data via ACSS and I2S (native Audio-gd format of course) and supports DSD as well as PCM.
It shares the same display and case color and height with other Audio-gd devices so it makes a handsome and harmonious match to your system.
The AES/EBU output does not work with one of my TASCAM devices but it does with another. For the price and if you don’t depend on AES/EBU (which will probably work with your device but may not) and you have an Audio-gd DAC then this is definitely worth buying. The HE is said to have even better sound quality but it does get hot which I did not want. So this unit at the price could be a very worthy compromise.
Jos is very responsive and friendly, and keeps you informed during the buying process. I recommend Magna Hifi as a top source of Audio-gd gear in Europe.
Support from Kingwa at Audio-gd is very good. Great gear, great people, what else can we ask for? :)
Norman (client confirmé) –
Love the DI-20………..works well with my Master 7 Singularity
Rene –
Every day I enjoy the quiet reproduction with silky soft refined highs and the beautiful warm glow and body in the midrange. The spatial representation is perfectly fine in terms of depth and width.