M-WAY Power Distribution Unit - 1.75m FiRST ReF (EU version)
The M-WaY power strip allows you to listen honestly to your set. A plug block with 6 or 9 outputs and power cord. In the socket, the IEC is directly connected to the conductors with cabling of the house, there are no filters, no fuses or otherwise internally. The housing is made of aluminum. The loose power cords are all provided with plugs with copper / brass interior. The power cords are not covered with foil or braid. It does not seem to be anything special until you connect your entire set to the mains.
The power strip with power cord is phase-correct, tonally balanced, detailed, dynamic and fair. Rhythm, timing and placement are right and you can hear and feel that right away. Nothing is exaggerated, enlarged, reduced or omitted. What you spin is what you get! In other words, true to the source. If the recording is sharp or bad, you will also hear it unadulterated. That is not always desirable, of course, but it allows you to find out that it is the recording or the device. Defects in recording and / or devices can be covered with cables and filters, but that is also your intention. You often lose more than is desirable.
Place the power strip 2 WoW blocks and you have your "filter" and more. Works super.
The power strip is standard equipped with an IeGo Gold inlet. There is also a pure silver version available at an additional cost. This pure silver inlet gives an even lower noise floor and even more beauty in all areas. Recommended.
The best result is obtained with a 2DW (Double Dutch WaY) Gold with pure silver IEC or Reference powercord. 2DW cable is also used internally.
The 2DW ReF with full copper connectors or a 2DW Gold (full copper schuko & pure silver IEC) gives top results on the power strips and WOW Powerblocks. You can order them with a 15% discount. Standard length is 1.75m
See the options for more options.