The cart is empty
audio-gd-he-1-fronthe104he105he108he107Audio-GD - HE1 - Regenerative PSU Balanced Preamplifier (RCA, XLR, ACSS)

Audio-GD - HE1 - Regenerative PSU Balanced Preamplifier (RCA, XLR, ACSS)

Common price: € 2.700 Our price: € 2.349
€ 1.941 excl VAT
Additional RCA output (Replacing ACSS)
Power cable (Default C13 EURO) - MWAY
In stock
Add to cart
  • Description
  • Specifications

Audio-GD - HE 1 (Regenerative powered discrete balanced preamplifier)

True balanced discrete preamplfier with integrated regenerative analogue power supply. Non- feedback ACSS Diamond output stages.All parts and components are selected based on excellent sonic and technical measurement performance. Components are e.g. from DALE resistors (USA), WIMA capacitors (Germany) and NOVER parts (UK). The used components but also the technical design (e.g. discrete analogue section and high speed FPGA's) of this system were being selected after many years of experience and practices and are considered to perform and provide supreme sonic results. The simplest and shortest signal journey brings out the most neutral and least colored sound.


- Single polarity FET buffer stages in input and output, which is had a bit lower distortion and improve on the sound quality. The Single polarity FET stages have non feedback design (Toshiba K170)
- Power supplies imporvements; lower noise floor resuluting in a darker background.
- Users can enable/disable the "shorten" input signal now.


audiogd r7he mhreg psu

An integrated regenerative power supply is a proprietary electric generator built into the unit to avoid any noise from main power and deliver ultra-low noise and clean AC wave to feed the preamp

It will regenerate the main power and block noise from the power line, this way the preamp is able to reproduce the most neutral and analog sound you can imagine.

First a transformer converts main voltage. DC conversion is done by class A PSUs power supplies. 

A discrete balanced regenerative wave generator produces the new ultra-low noise wave form at 400Hz. The 400Hz frequency was chosen because they have better efficiency compared to traditional 50Hz and at this frequency, 400Hz, it will boost the sound to reproduce real and pleasant analog sound.

The balanced gain amps with powerful output stages are driving the regenerative transformers to produce the extreme clean AC power. The extreme regenerated clean AC power is send to separate class A PSUs power supplies for both left and right channel.

The discrete class-A DC power supply with high input impedance will avoid any noise and allow the amplifier stages to have low output impedance at very high speed and linear at frequency spectrum.


  • HE-1 has extremely high fidelity; its SQ is neutral. It can show how good or how bad a recording or source is.


  • A cable is available to connect HE-1 ACSS outputs to a KRELL CAST amplifier input. KRELL amplifiers have lower gain versus audio-gd HE series amplifiers when using the CAST connection, so customers can custom order the HE 1 to have higher ACSS output gain if expecting to connect to KRELL amplifiers.


  • Built-in top class discrete regenerative power supply 
  • Fully balanced design built by discrete analog stages without any OPA or coupling caps in the signal channels.
  • Non- feedback ACSS analog output stage .
  • Uses three R-core transformers (135W total), separate power supplies for the digital components, right and left channels.
  • More than 50,000uf audio grade NOVER capacitors are used to ensure ample and smooth power supply. 
  • A total of 9 groups class A PSU's  are used to purify the power supply. To achieve a high S/N ratio, the control circuit is powered with separate regulators. 
  • Uses high-grade parts and exactly matched transistors.
  • Four channel 99 steps digitally controlled relay-based volume control avoids channel imbalance and improves sound quality. 


  • 1. XLR balanced
  • 2. RCA single ended
  • 3. XLR balanced
  • 4. RCA single ended
  • 5. ACSS balanced (mini xlr)


  • Balanced (XLR)
  • Balanced ACSS (4-Pin XLR)
  • Single ended (RCA / Cinch)


Volume control consist of relay-controlled attenuators. Fully-independent, fully-balanced stereo volume controls. The volume controls feature consist of high-precision 0.05% tolerance film resistors and golden contact relays. Buffered inputs and outputs.There 4 channels volume boards are built in the unit to achieve ultimate balanced volume control. They are controlled by a digital signal controlling the high quality relays switching the precision resistors in analog area.

Audio-GD lineair volume characteristic Volume steps in comparison to standard volume control
volumecontrol1 volumecontrol2

Quality of volume control is very important in balanced applications . It have to effectuate the four channels to work as synchronous as possible to keep the balanced signal in perfect shape. In traditional volume controls the balanced output will introduce distortion which will negatively influence sound quality and performance and might even get worse than a single ended setup and waste the advantages of balanced designed solution.

Brand URL :
Weight: 16 kg
Width: 430 mm
Length: 430 mm
Height: 93 mm
Magna Hifi - Webshop: Audio-GDAudio-GD


9.5V @ RCA 19V @ XLR 4.8MA @ ACSS
100 steps Supper Exponential Volume Characteristic
70W Class A @230V or 120V
W430 X L450 X H125 (mm, Fully aluminium )
Remote Control
IEC Power Cord
audiophilles mh service



mh contact mh payable